Thermo Fisher Scientific CyberScan CON 400/410 (For units manufactured before March 2010, discontinued) - Manual (Page 37)

Instruction Manual CON 400/410
- 31 -
7.5.2 P4.2 Selecting ° C or ° F
You can select between °C and °F units for temperature readings. Meter default is °C.
From measurement mode
1. Press
SETUP key to enter Set Up mode.
2. Press the MI/S or MR/T keys to scroll through
subgroups until you view parameter P4.0.
3. Press the ENTER key two times to select parameter
4.2.
4. Press the MI/S or MR/T keys to toggle between
°C and °F.
5. Press the ENTER key to confirm selection and to
proceed to step 3 of P4.3. Press the CAL/MEAS
key to return to measurement mode.
See Figure 27.
Figure 27 - Change Temperature
measurement unit