Thermo Fisher Scientific Thermo Scientific Temp 360 - Manual (Page 6)

- 2 -
2. SAFETY PRECAUTIONS
WARNING:
1. This instrument is designed to accept
low level signals supplied by standard
RTDs. Under NO circumstances
should the input voltage exceed the
specified 50V RMS.
2. To prevent ignition of a hazardous
atmosphere, batteries must only be
changed in an area known to be non-
hazardous.
CAUTION:
1. Do not use or store this instrument in
microwave ovens or any abnormally
hot or cold areas.
2. Weak batteries should not be left in
the instrument. Dead batteries can
leak and cause damage to unit.
DANGER:
1. Voltages present at the RTD may
also be present at the battery
terminals. Always disconnect the RTD
when changing batteries.