Thermo Fisher Scientific CyberComm Pro for CyberScan pH 1100 & pH 2100 - Manual (Page 20)

Instruction Manual CyberComm pH 1100/ 2100
16
4.3.5 Temperature Reading
This curve shows the temperature in which the measurement is carried out simultaneously. You can choose
to view the reading with or without the temperature curve by clicking on the ‘Show/Hide Temperature’ icon on
the icon panel.
4.3.6 Mode Drop down Menu
Change Mode of Measurement by selecting the preferred parameter from this drop down menu.
4.3.7 Store and Recall
a) Store Memory
The two large icons enable you to store the reading during any point during the measurement. You may want
to store one reading at different times, under different mode. (E.g.: a pH reading then subsequently a mV or
Ion reading)
b) Recall
Memory
See Figure 20.
The ‘recall memory’ icon then enables you to see the readings that you stored in a pop up box.
Figure 20: Recall Memory/ Recorded Readings and Information
4.4 To quit CyberComm Program
See Figure 21.
Choose Exit from drop down menu of File or Click the ‘X’ button on the top right hand corner of the window.
A pop-up menu will prompt you to save settings; select Yes if you want the settings you set to be available
for next usage.
Figure 21: CyberComm Pro/ Exit Screen with options to save settings