Asus INTEL CUW(E)-FX - Manual (Page 20)

20 ASUS CUW(E)-FX User’s Manual
3. HARDWARE SETUP
Motherboard Settings
3. H/W SETUP
5) Onboard LAN Setting (LAN_EN)
The onboard LAN may be enabled/disabled with this jumper.
Setting LAN_EN
Enable [1-2] (default)
Disable [2-3]
®
CUW(E)-FX
CUW(E)-FX LAN Setting
Enable
(Default)
Disable
1 2 3 1 2 3
LAN_EN
6) Onboard LAN Power Setting (LANPWR)
The onboard LAN power may be set to +3 Volt or +3 VSB. Select +3 Volt if you
do not have a power supply with 720mA standby power. Selecting +3 VSB will
allow the use of Wake-on-LAN but may not allow system wakeup if the power
supply’s standby power is insufficient.
Setting LANPWR
+3 Volt [2-3] (default)
+3 VSB [1-2]
®
CUW(E)-FX
CUW(E)-FX LAN Power Setting
+3 VSB
LANPWR
+3 Volt
(Default)
1 2 3 1 2 3