Warren Controls 2900 Series High Capacity general purpose Globe Valves - Manual (Page 2)

2
2600 Emrick Blvd • Bethlehem, PA 18020 • USA •800-922-0085 • www.warrencontrols.com
these instructions should be thoroughly reviewed to deter-
mine the proper integration of the equipment into the overall
plant operational procedures. Warren Controls does not
assume responsibility for the selection, use, or maintenance
of any product. Responsibility for proper selection, use, and
maintenance of any Warren Controls product remains solely
with the purchaser and end-user
actuators anD accessorIes
Series 2900 High Capacity, General Purpose, Globe Control
Valves are available with a variety of actuators and accessories.
These actuators and accessories have separate instructions. For
complete control valve installation, operation, and maintenance
instructions see also the instructions for the actuator and
accessories in use.
valve IDentIfIcatIon
To use these instructions it is necessary to identify the configuration of the valve. Factory assembled control valves have a
nameplate mounted on the actuator. The valve’s part number (P/N) is present on the plate. The part number represents the
configuration of the control valve. To identify the valve’s type, size, actuator, accessories, and other characteristics decode the
part number using configuration table. If the information is incomplete, incorrect, or not present contact the factory with the
valve serial number listed on the plate. (See Information Present on Control Valves section for location of part number, serial
number, and other important information on valve.)