Warren Controls 2800 Series Precision Globe Control Valves - Manual (Page 2)

2
2600 Emrick Blvd • Bethlehem, PA 18020 • USA •800-922-0085 • www.warrencontrols.com
equipment into the overall plant operational procedures. Warren
Controls does not assume responsibility for the selection, use, or
maintenance of any product. Responsibility for proper selection,
use, and maintenance of any Warren Controls product remains
solely with the purchaser and end-user ACTUATORS AND ACCESSORIES
Series 2800 Precision Globe Control Valves are available with
a variety of actuators and accessories. These actuators and
accessories have separate instructions. For complete control valve
installation, operation, and maintenance instructions see also the
instructions for the actuator and accessories in use
VALVE IDENTIFICATION
To use these instructions it is necessary to identify the configuration of the valve. Factory assembled control valves have a
nameplate mounted on the actuator. The valve’s part number (P/N) is present on the plate. The part number represents the
configuration of the control valve. To identify the valve’s type, size, actuator, accessories, and other characteristics decode the
part number using configuration table. If the information is incomplete, incorrect, or not present contact the factory with the
valve serial number listed on the plate. (See Information Present on Control Valves section for location of part number, serial
number, and other important information on valve.)
S B 6 H T P
316 SS Bronze Alloy 6 17-4 PH Teflon PEEK
050
1/2 inch 20, 28, 30 N/A 20 20 20, 28 20, 28
075
3/4 inch 20, 28, 30 N/A 20 20 20, 28 20, 28
100
1 inch 20, 28, 30, 32SS 32 BRZ 20 20 20, 28 20, 28
125
1-1/4 inch 20, 30 N/A 20 20 20 20
150
1-1/2 inch 20, 30, 32SS 32 BRZ 20 20 20 20
200
2 inch 20, 30, 32SS 32 BRZ 20 20 20 20
Configurations
Valve
Type
Size Body
Material
End Connection Trim Style Trim Material Trim Cv
20
2-Way Single
Seat
28
2-Way
Lo-Flow
30
3-Way Mixing
32
3-Way
Diverting
050
1/2 inch
075
3/4 inch
100
1 inch
125
1-1/4 inch
150
1-1/2 inch
200
2 inch
B
Bronze
F
CF8M
S
Screwed
B
SCH 40
Buttweld End
F
Full Port
1
1st Port Reduction
2
2nd Port
Reduction
3
3rd Port Reduction
4
4th Port Reduction
NOTE:
Port reductions
only available on
Type 20/28/30.
Check factory for
availability.
Model Packing Type
T
Teflon
G
Graphite
V
Vacuum Service
L
EPDM
Stainless Steel,
Type 20 Bodies come
standard w/PEEK
bearings. Used for
Temp. up to 500°F.
1. SELECTIONS Please make a selection from each table of OPTIONS below to make a complete model number string.
V A L V E B O D Y
2. OPTIONS
28N
E
Equal %
L
Linear
M
Mod Lin
Types 30/32,
Linear Only
Types 28
Mod Lin Only
S
316SS *
B
Bronze
6
Alloy 6
H
17-4 PH
T
Teflon
P
PEEK
NOTE:
* Type 28, 316SS
trim uses a harder
Nitronic 60 seat.
SIZE
VALVE TYPE/TRIM MATERIAL COMBINATIONS:
TRIM MATERIAL
13
PS 2800 F 0408
For additional applications, and/or products call: 800-922-0085 or visit:
www.WarrenControls.com
VALVE STYLE VALVE SIZES ACTUATORS
Type 20 1/2”- 2” DL49
Type 20 1” - 2” DL84
Type 20 1-1/4” - 2” DL84XR
Type 28 1/2” - 1” DL49
Type 30 1/2”- 2” DL49
Type 30 1-1/4” - 2” DL84
Type 30 2” DL84XR
Type 32 1/2”- 2” DL49 & DL84
See Shut-Off ∆P Ratings for details.
VALVE TYPE/ACTUATOR COMPATIBILITY:
28N