Unit lifting, Ultima compact condensing units, Installation data – Airedale Ultima Compact Condensing Unit 30kW - 450kW User Manual
Page 14
ULTIMA COMPACT
Condensing Units
14
Condensers & Condensing Units
Installation & Maintenance : 6259675 IM V1.4.0 10/2013
Installation Data
UNIT LIFTING
Employ lifting specialists.
Local codes and regulations relating to the lifting of this type of equipment should
be observed.
Use the lifting eye bolts/lifting lugs provided.
Attach lifting chains to the 4 lifting eye bolts/lifting lugs provided, each chain and
eye bolt must be capable of lifting the whole chiller.
Use the appropriate spreader bars/lifting slings with the holes/lugs provided.
Lift the unit slowly and evenly.
If the unit is dropped, it should immediately be checked for damage and reported
to Airedale Service.
CAUTION
Only use lifting points provided.
The unit should be lifted from the base and where possible, with all packing and
protection in position. If any other type of slinging is used, due care should be taken to
ensure that the slings do not crush the casework or coil.
LIFTING DIMENSIONS
A
C
B
E
D
UCCU30 - 80 (Except UCCU75)
A
B
(1)
C
(1)
D
(1)
E
1 FAN /1
mm
300
1050 (1450)
300 (300)
1900 (2200)
1270
2 FANS /1
mm
300
1450
750
2200
1270
E
A
B
C
D
UCCU75 - UCCU250
(Except UCCU80)
A
B
C
D
E
2 FANS /1
mm
290
1900
585
2500
1450
3 FANS /1
mm
290
2015
1320
2500
1450
4 FANS /1
mm
290
2870
1315
3000
1450
4 FANS /2
mm
180
1580
605
2500
2000
6 FANS /2
mm
595
1650
925
2500
2000
8 FANS /2
(Tandem Compressor)
mm
595
2050
1330
2500
2350
8 FANS /2
(Trio Compressor)
mm
465
2560
1625
3000
2350
10 FANS/2
mm
465
3135
1900
3500
2350
12 FANS/2
mm
465
3610
2275
3500
2350
14 FANS/2
mm
465
4385
2350
4000
2350
16 FANS/2
mm
465
5035
2600
5000
2350