American Comfort GMCN 100 Series - Manual (Page 4)

1-877-645-0299 www.AmericanComfort.com 2
WARNING: It is normal for the power cord to feel warm to the touch. However, a loose fit
between the outlet and the plug may cause overheating of the plug . If this occurs, try inserting the
plug into a different outlet. Contact a qualified electrician to inspect the original outlet for damage.
Specifications
Model Number: GMCN100 Series
BTU/hour: 9,000
Voltage Rating: 115v/60Hz
Power Consumption: 950 W
Refrigerant: R410A
Fan Speeds: 2
Unit Size:
12.99” x 26.77” x 11.02”
Unit Weight: 46 lb
Square Feet: Approximately 450 ft
2
Maximum Cooling Temp: 64°F / 16°C
Minimum Cooling Temp: 90°F / 31°C
Pints of dehumidification: 1.25L/hour
Noise Level: 64dB(A)
Important:

The compressor will start approximately 3 minutes after the unit has been turned on (this will help
prolong the life of the compressor). After switching the unit off, please wait at least 3 minutes
before turning the unit back on.

The compressor will switch off when the room temperature is lower than the set temperature. The
fan will however, continue to work. When ambient temperature rises above the set temperature,
the cooling will resume.
LCDI Plug Instruction
If you plug in the Air Conditioner, and there is no green light on the plug, Press the
reset button on the LCDI plug. The green light should be on, indicating that the air
conditioner is getting power from the electrical outlet.
If the plug continues to trip (which is a USA national safety standard feature) and the
green light goes off, the cord or plug may be damaged preventing you from resetting
the unit. For your safety, contact a licensed electrician.
Figure 1