Audient ASP510 Surround Sound Controller - Manual (Page 10)

Operation Manual
10
Functions & Controls
©audient 5/2001
+10 -10
0
+10 -10
0
+10 -10
0
+10 -10
0
+10 -10
0
+10 -10
0
SUR RO UN D SOUND CON TR OL L ER
1 2
ASP510 SURROUND
PROCESSOR RACK
The Surround Processor
contains all of the audio
electronics for the ASP510
system. It is connected to
and controlled by the
ASP510 remote unit via an
RS485 link.
4 5 3
The rear of the unit
contains the D-SUB
interfaces for up to six
monitor sources, three
surround and three stereo.
Inserts are also provided
for an encoder/decoder.
The Console Interface
allows the ASP510 to
integrate seamlessly with
the host console Solo ,Dim
and Talkback logic
systems. Provision to
connect the console
control room outputs also
allows these to be fed
directly to the Left and
Right monitors when
working only in stereo with
the ASP510 in bypass
mode. Using the same
interface a Guide or
Production track can be
routed to the monitors via
the ASP510.
The six speaker outputs are
each provided with front
panel level trim controls.
1. MONITOR LEVEL trim
controls provide
adjustment of +/- 10dB
for each speaker
output.
2. POWER on indicator.
3. Mains inlet and
voltage selector.
4. Re m o t e c o n t r o l
interface - connects via
a CAT5 cable to the
mating connector on the
rear face of the Remote
unit.
5. Audio and logic
interfaces on 25-PIN D-
SUB connectors.
Audio interfaces are
either electronically
balanced or ground-
sensing.
Logic interfaces are via
AC/DC floating opto-
isolators.