Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities - Manual (Page 22)

Badger
®
ORION
®
Utility 1.0
January 2009
Page 21 of 28
You can also display all of the ORION transmitters that are received. Click the radio
button to Hear All Badger ORION Transmitters, then click on the Start button. You’ll
see a screen like this.
To see all of the readings, use the scroll bar on the right side.
Notice that the information on the grid allows you to quickly see special conditions. If a
Badger ORION is reporting a Tamper condition, the line is shaded. If the water Badger
ORION is reporting a Potential Leak condition, the Leak field is checked and shaded in
yellow. Finally, you can also see the type of meter (water Badger RTR
®
, water Badger
ADE
®
or gas) that each Badger ORION is reporting.
If you wish to only see the Badger water or gas ORION readings, or a combination of
readings, choose the types of meters on the right side. If you choose only the gas
readings, and then perform an RF read for all transmitters in range, you might see a
screen like this.