2 no sound, Altinex policies, 1 limited warranty/return policies – Altinex DS801-111 User Manual
Page 10: 2 contact information, Special application
SPECIAL APPLICATION
400-0442-006
9
Cause 4:
Video equalization required.
Solution:
Adjust the VIDEO EQUALIZATION
on the DS801-111.
Some monitors are very sensitive to
signal quality and this may prevent
the monitor from displaying an
image until the equalization is
adjusted. See the operation section
for adjustment details.
Cause 5:
The display has a problem.
Solution:
Make sure the display is powered
and is turned on. If there is still no
display, please call ALTINEX at
(714) 990-2300.
8.2 NO SOUND
Cause 1:
The source has a problem.
Solution:
Check the source and make sure
that there is a signal present and all
source connections are correct. If
the source is working and there is
still no sound, see Cause 2.
Cause 2:
The volume is too low.
Solution:
Increase the gain at the source. If
there is still no sound present, see
Cause 3.
Cause 3:
Cable connections are incorrect.
Solution:
Make sure that cables are properly
connected. Also, make sure that the
continuity and wiring are good. If
there is still no sound, see Cause 4.
Cause 4:
The receiving device has a
problem.
Solution:
Make sure the receiving device is
powered and is turned on. If there
is still no sound, please call
ALTINEX at (714) 990-2300.
ALTINEX POLICIES
9
9.1 LIMITED WARRANTY/RETURN POLICIES
Please see the
ALTINEX
website at
for details on warranty and
return policies.
9.2 CONTACT INFORMATION
ALTINEX, Inc.
592 Apollo Street
Brea, CA 92821 USA
TEL: 714 990-2300
TOLL FREE: 1-800-ALTINEX
WEB:
E-MAIL: