American Audio Q-D3 - Manual (Page 14)

Model: Q-D3/Battle Deck, 2 Channel Mixer
POWER SUPPLY: AC 115/230V, 50/60Hz Selectable
DIMENSIONS: 12.5”W x 10.25”D x 4”H /254 x 308 x 102.5 mm
WEIGHT:
5.5Lbs./2.8Kgs
CROSSFADER: Feather Fader Plus - VCA detecting fader start control -
Low grounding impedance crossfader
POWER CONSUMPTION: 5W typical, 7W w/ full headphone output
HEADPHONE IMPEDANCE: 16 Ohms
ENVIRONMENTAL CONDITION: Operating Temperature: 5 to 35 deg. C; Humidity: 25 to 85%
RH (non-condensing); Storage Temperature: -20 to 60 deg. C
Input Sensitivity (Level/Impedence): LOAD=47K OHM
LINE:
14dBV (200mV)12K Ohm +/-2dB
PHONO: -48dBV (4mV)47K Ohms +/-3dB
MICROPHONE: -49 dBV (3.6mV0 /3K Ohms +/-3 dB
AUX: -14 dBV (200mV)/47K Ohms +/-2dB
Output Sensitivity (Level/Impedence): Note: 0dBV=1Vrms
MASTER OUT (RCA):
0dBV (1V)/610 Ohms +/-2dB
REC OUT (RCA): -10dBV (316mV)/2.2K Ohms +/-2dB
PHONES (LOAD=32 OHMS): -8dBV (0.4V)/33 Oms +/-2dB
Maximum Output (Load = 47K, THD = 5%)
MASTER (RCA):
MORE THAN 18dBV (8V)
REC: MORE THAN 18dBV (8V)
PHONES (Load=32 ohms): MORE THAN 6dBV (2V)
CHANNEL BALANCE: Within 3dB
Frequency Response:
LINE: 20Hz
- 20KHz, ±1dB
PHONO: 20Hz - 20KHz, ±1.5dB (RIAA)
AUX: 20Hz - 20KHz, ±1dB
MICROPHONE: 20Hz - 20KHz, +1,-3dB
Output Noise (IEC-A WEIGHTED):
LINE/AUX: LESS
THAN -70dBV
PHONO: LESS THAN -65dBV
MIC: LESS THAN -55dBV
THD - Total Harmonic Distortion (1Khz, 0dBV Output):
MASTER OUTPUT (LOAD = 47K OHMS):
Less than 0.2%
PHONO: (LOAD = 32 OHMS): Less than 0.5%
CROSS TALK: < 40dB @ 1Khz between left and right channels
Channel Equalizer:
BASS:
+12 ±1dB,-22 ±2 dB at 70KHz
MID: +12 ±1dB,-17 ±2 dB at 1KHz
TREBLE: +13 ±1dB,-27 ±2 dB at 13KHz
Microphone Equalizer:
BASS:
+12 ±1dB,-12 ±1 dB at 100KHz
TREBLE: +12 ±1dB,-12 ±1 dB at 10KHz
Q-D3™ Specifications
© American Audio ® - www.americandj.com - Q-D3™ Instruction Manual Page 14