Audiovox PRO 9232A - Manual (Page 6)

128-6627
6 of 8
Page 6
(Siren/Horn Chirps 1X, Lights Flash 1X)
D Within 3 seconds, turn the ignition switch off then on.
1. The LED flashes 1 time indicating feature #1 programming, Door Lock Timing Select.
The siren will chirp 1, 2 or 3 times indicating setting.
Use the factory Lock button of the transmitter or the factory lock switch to select.
1 Chirp, 1 Flash = 1 Second Lock/1 Second Unlock.
2 Chirps, 2 Flash = 3.5 Seconds Lock, 3.5 Seconds Unlock.
3 Chirps, 3 Flash = 1 Second Lock, Double 1 Second Unlock.
2. Press then release valet push-button switch 1x to advance to feature #2, Auto Lock On, Off.
Siren/Horn Chirps 2x, Lights Flash 2x, LED Flashes 2x Pause, 2x Pause, indicating feature 2 selected. Use Factory
Lock button of transmitter or the factory door lock switch to select.
1 Chirp, 1 Flash = Auto Locks On
2 Chirps, 2 Flash = Auto Locks Off
3. Press and release valet push-button switch 1x to advance to feature #3. Auto Unlock On, Off.
Siren/Horn Chirp 3x, Light Flash 3x, LED Flashes 3x Pause, 3x Pause, indicating feature 3 selected. Use Factory Lock
button of transmitter or the factory door lock switch to select.
1 Chirp, 1 Flash = Auto Unlocks On
2 Chirps, 2 Flash = Auto Unlocks Off
4. Press and release valet push-button switch 1x to advance to feature #4. Active lock/Passive Lock On,
Off Select .
Siren/Horn Chirp 4x, Light Flash 4x, LED Flashes 4x Pause, 4x Pause, indicating feature 4 selected. Use Factory Lock
button of transmitter or the factory door lock switch to select.
1 Chirp 1 Flash = Passive Locks
2 Chirps, 2 Flash = Active Locks
5. Press and release valet push-button switch 1x to advance to feature #5. Passive/Active Arming Select.
Siren/Horn Chirp 5x, Light Flash 5x, LED Flashes 5x Pause, 5x Pause, indicating feature 5 selected. Use Factory Lock
button of transmitter or the factory door lock switch to select.
1 Chirp, 1 Flash = Passive Arming
2 Chirps, 2 Flash = Active Arming
6. Press and release valet push-button switch 1x to advance to feature #6. Hardwire/Voltage Sensing Select.
Siren/Horn Chirp 6x, Light Flash 6x, LED Flashes 6x Pause, 6x Pause, indicating feature 6 selected. Use Factory Lock
button of transmitter or the factory door lock switch to select.
1 Chirp, 1 Flash = Hardwire
2 Chirp, 2 Flash = Voltage Sense
7. Press and release valet push-button switch 1x to advance to feature #7. Door Trigger Instant Or 15 Second
Delay Select.
Siren/Horn Chirp 7x, Light Flash 7x, LED Flashes 7x Pause, 7x Pause, indicating feature 7 selected. Use Factory Lock
button of transmitter or the factory door lock switch to select.
1 Chirp, 1 Flash = Door Trigger Instant
2 Chirp, 2 Flash = Door Trigger Delay
8. Press and release valet push-button switch 1x to advance to feature #8, one wire or two wire disarm select. Use
Factory Lock button of transmitter or the factory door lock switch to select.
1 Chirp, 1 Flash = 1 Wire Disarm
2 Chirp, 2 Flash = 2 Wire Disarm.
NOTE:The program mode is exited if any of the following occur:
a. 15 seconds of inactivity expire during any of the above steps.
b. The ignition key is turned off.
c. The push button switch is activated more than 8 times .
The Siren/Horn will emit a long chirp followed by a short chirp indicating the program mode has been exited.