Blue-White F-420N Machined Acrylic Tube - Manual (Page 4)

URL: www.Blue-White.com
E-mail: [email protected] Phone: 714-893-8529
[email protected] Fax: 714-894-0149
Exploded View and Parts List
Standard Meters
Shading indicates item not sold separately
1
2
3
5
6
7
3
2
1
F-420N 1-1/2” MPT
Maintenance
The “Exploded View” drawing illustrates assembly of the F-420N series meter. If your flowmeter
needs to be cleaned refer to this drawing when reassembling the unit. The tapered tube may be
cleaned with a soft bottle brush. Use a MILD soap and water solution for cleaning purposes.
Note the floats “up” position.
BLUE-WHITE INDUSTRIES
LIMITED WARRANTY
FLOWMETERS are warranted to be free of defects in material and workmanship for up to 12 months from
the date of factory shipment. Warranty coverage is limited to repair or replacement of the defective flowmeter
only. Blue-White Industries does not assume responsibility for any other damage that may occur.
This warranty does not cover damage to the flowmeter that results from misuse or alterations, nor damage that
occurs as a result of: meter misalignment, improper installation, over tightening, use of non- recommended
chemicals, use of non-reccomended adhesives or pipe dopes, excessive heat or pressure, or allowing the
meter to support the weight of related piping. Flowmeters are tested and calibrated with water and air only.
Although meters may be suitable for other chemicals, Blue-White cannot guarantee their suitability.
Flowmeters are repaired at the factory only. Call or write the factory to receive a Return Authorization Number,
carefully pack the flowmeter to be returned, including a brief description of the problem. Note the RA number on
the outside of the carton.
Prepay all shipping costs. The factory does not accept COD Shipments. Damage that occurs during shipping is
the responsibility of the sender.
BLUE-WHITE INDUSTRIES
5300 Business Drive, Huntington Beach, CA 92649
(714) 893-8529 • FAX (714) 894-9492
F-420 Parts List. 1-1/2”MPT
Catalog Number Description Amount Required Item
1
2
3
5
5
5
6
7
76001-026 1-1/2” MPT Adapter, F-420N, PVC 2
90003-123 O-ring, 127, Viton 2
91001-159 Wire holder, F-420, 1.5 PSF 2
- Float 5 - 25 GPM, SS 1
- Float 8 - 40 GPM, SS 1
- Float 10 - 50 GPM, SS 1
76001-038 Guide Wire, 420.125 x 7.31 SS 1
- F-420 Large Body, Acrylic 1
4
4
4 2-006V O-ring, 006 Viton 2
Industries, Ltd.
Blue-White
Industries, Ltd.
®