Crystal ConFigM30 Digital Pressure Calibrator Software - Manual (Page 4)

Operating Instructions  2
ConfigM30 User's Manual
Operating Instructions
—
INSTALLATION
ConfigM30 is distributed as a self-extracting Setup application. Launch ConfigM30Setup.exe and follow the on-screen prompts. If the program was provided
on CD, run the SETUP.EXE from the ConfigM30 folder and follow the on-screen prompts.
The first time you start ConfigM30, you must select the communications port to be used. Click on the drop down box under the Connect button and choose
Auto to have ConfigM30 automatically detect your gauge, or select an appropriate COM port for your computer.
Select a port to connect to a 30 Series Calibrator.
Click the Connect button to establish connection to your gauge. If an error is displayed, check cables and verify that the gauge is operating.
If the connection is successful ConfigM30 displays information retrieved from the gauge, such as the serial and model number. The current configuration of
the gauge. Make any changes desired then click the
Update Gauge button to commit those changes to the gauge.
The Update Gauge button commits your configuration changes.
If you have more that one gauge to be customized, click the Disconnect button , connect the serial cable to the next gauge to be customized and then click
the Connect button . If no further changes are necessary, click the Close button to exit ConfigM30.