Mounting – Crystal GaugeCalHP Pressure Comparator User Manual
Page 7
Setup
5
GaugeCalHP Comparator Operation Manual
MOUNTING
The GaugeCalHP includes rubber feet that stabilize the unit up to 5000 psi. At pressures above 5000 psi, the force required to rotate the handle may cause the
base of the comparator to lift. One of two methods may be used to mount the GaugeCalHP to a bench or table.
X
Using the Mounting Brackets
1
Loosen the mounting bracket screws.
2
Rotate the brackets, then slide them over the front of your table (max thickness of 1.75”).
3
Tighten the mounting bracket screws.
Rotate the mounting brackets…
then slide them over the front of your table.
Note:
To ensure the comparator is mounted securely, grip and compress the brackets to the underside of the table while tightening the mounting screws.
X
Install Onto a Table
Order the optional Table Mount Kit (P/N 5191) to bolt to a table.