Crystal GaugeCalHP Pressure Comparator - Manual (Page 4)

2

GaugeCalHP Rebuild Kit Instructions
PN 5139
9 Remove the Manifold Fitting from
the Manifold Base.
10 Replace the O-ring ( P N 5139 ).
—
Main Components and Assemblies
6
Lift the Drip Tray to remove it from
the Manifold Assembly.
7
Remove the Manifold Nut and Wave
Spring from the Manifold Fitting.
8
Lift the Manifold Assembly to
remove it from the Manifold Fitting.
 Rebuild the Manifold Assembly
using the
procedure on page 5.