ADC Micro BS Plus UltraWAVE - Manual (Page 2)

10/08
•
106419AE
UltraW
A
VE
Micr
o
IP
BS
Plus
UltraWAVE Micro IP BS Plus
IP GSM Base Station Controller and Base Transceiver Station
2 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1
Features:
Available in 850, 900, 1800 and 1900 MHz frequency bands •
Frequency hopping •
Sectorization •
General Packet Radio Service (GPRS) •
Dynamic power control (uplink and downlink) •
Significantly improved BTS sensitivity: -114 dBm (optimal combining diversity) or -111 dBm (no diversity) •
Remote monitoring: Temperature, fan, power supply (PSU), power amp, VSWR can be monitored from •
central office enabling remote diagnosis and quick recovery
External alarms for third party equipment are also supported. •
Optional redundant power supply with PSU failure alarm support. •
-48 VDC power supply. AC rectifier available. •
Integrated full rack solution available: UltraWAVE integrated with additional on-site equipment such as •
transmission, battery backup, etc. in one rack.
Common hardware modules: single slot TRX, ICP, RFU. •
Supports AMR,EFR, FR codecs. Upgradable to EDGE. •
The Micro product line provides a compact and cost-effective platform, which helps lower the cost
of network ownership. They are easy to upgrade or repair in the field and provide a range of new
monitoring and control functions. The UltraWAVE Micro IP BS Plus supports up to two TRXs in one
chassis. With a single compact chassis, it can support an S11 or O2 site. It has the industry leading
power amplifier of up to 50 Watts when configured for 850, 900, 1800 and 1900 MHz GSM networks.
Micro supports all the key BTS features, such as frequency hopping, sectorization, and GPRS.
The Micro IP BS Plus increases the BTS coverage with industry leading power output (50W measured at
antenna port without combining). Receive sensitivity with antenna diversity is up to -114 dBm. Designed
for easy expansion of the BTS capacity, the Micro BS Plus is field upgradable. Operators can start with a
small system and pay as they go to add capacity.
The Micro IP BS Plus is designed for low cost maintenance with remote monitoring, external alarms,
overheating protection, redundant power supply, field replaceable modules, and easy front access. It can
reduce the on-going operation expenses for the operators. An integrated turn-key BTS package option
is available with transmission, battery, and other site equipment.