Dwyer UXF3 - Manual (Page 69)

- 65 -
9.17 PV
Click the [PV] button on the menu screen to display the PV screen (when RS-485 communication system is selected
only).
CAUTION
x The window cannot be moved on the PV screen.
x Do not start or operate other applications while measurement is in progress. Otherwise proper
measurement cannot be obtained.
Fig. 9-26 < PV screen >
Select the station No. to be measured by checking the check box of the desired item ( ;). Make the check box of the
items not to be selected (or to be canceled) blank ( †).
The number of measurable units can be calculated by the following expression:
Number of measurable units = Cycle (sec) / 0.5 sec
See Table 9-20 for details of PV.
Bulletin F-107-UXF3-S