Dwyer PSX2 User Manual
Ultrasonic flowmeter
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- PREFACE
- CONTENTS
- WARNING SYMBOLS AND THEIR MEANINGS
- SAFETY PRECAUTIONS
- 1. OVERVIEW
- 2. CHECK OF DELIVERED ITEMS
- 3. CHECK MODEL AND SPECIFICATION
- 4. NAME AND EXPLANATION OF EACH PART
- 5. POWER ON AND POWER OFF
- 6. WIRING
- 7. INPUT OF PIPING SPECIFICATIONS
- 7.1 Display of pipe setup screen
- 7.2 Entry of site name (not required measurement)
- 7.3 Outer diameter of piping (unit: mm)(range: 13 to 6000 mm)
- 7.4 Piping material
- 7.5 Wall thickness (unit: mm) (range: 0.1 to 100.00mm)
- 7.6 Lining material
- 7.7 Lining thickness (unit: mm) (range: 0.01 to 100.00 mm)
- 7.8 Kind of fluid
- 7.9 Viscosity
- 7.10 Selection of sensor mounting method
- 7.11 Kind of sensor
- 7.12 Transmission voltage (used when an indicator is 1 orless during measurement)
- 7.13 Completion of PROCESS SETTING
- 8. MOUNTING OF DETECTOR
- 9. START MEASURING
- 10. SETTING OPERATION (APPLICATION)
- 10.1 How to use SITE SETUP function (SITE SETUP page)
- 10.1.1 SITE MEMORY: when registering data which are set and calibratedon the page
- 10.1.2 ZERO ADJUSTMENT: when performing zero adjustment
- 10.1.3 UNIT OF OUTPUT: when changing unit of each output
- 10.1.4 OUTPUT CONTROL: when controlling measured value(output control function)
- 10.1.5 TOTALIZER: when performing the total process of measured data(totalize)
- 10.2 Setting of data logger function
- 10.3 Setting of system (SYSTEM SETUP screen)
- 10.4 Setting of range (setting screen for input/output range)
- 10.5 Use of printer function (PRINTER screen)
- 10.6 Maintenance function (MAINTENANCE screen)
- 10.7 Flow velocity distribution display function (optional)
- 10.8 Contents of errors in status display
- 10.1 How to use SITE SETUP function (SITE SETUP page)
- 11. MAINTENANCE AND CHECKUP
- 12. ERROR AND REMEDY
- 13. EXTERNAL COMMUNICATION SPECIFICATION
- 14. HOW TO USE PRINTER
- 15. REPLACEMENT OF BUILT-IN BATTERY
- 16. APPENDIX