Dwyer DCAL 1000 - Manual

Model DCAL 1000 Calibration Software and Interface
Specifications - Installation and Operating Instructions
Bulletin TE-DCAL1000
SPECIFICATIONS
Probes Available for Calibration: AP1, AP2, RP1, RP2.
Power Requirements: Powered from PC USB port.
Temperature Limits: 50 to 86°F (10 to 30°C).
Weight: 6.5 oz (184.2 g).
Agency Approvals: CE, RoHS. The Model DCAL 1000 Calibration Software and Interface is used to verify
calibration, calibrate, and manage calibration certificates for wired and wireless test
equipment probes used with the Model UHH, Series AQTI, or Mobile Meter™
software. No external power is needed for the interface, as it draws its power
directly from the USB port on the PC. LED’s on the front panel indicate that the unit
has power, and when it is communicating to a wired or wireless probe. The PC
software allows the user to select what type of operation is needed and which
available probe that the user would like to calibrate and/or verify. It also keeps a
record of all of the certificates that were generated through the software for future
regeneration of the certificate. The software guides the user through the calibration
process while giving the flexibility for the user to determine the required number of
measurement points for each calibration and certificate. It also informs the user if
the probe is no longer capable of being recalibrated. Included with the interface is
a software CD, USB cable, and digital copy of the instruction manual.
POWER
WIRELESS PROBE
WIRED PROBE
USB
WIRED
PROBE DCAL 1000
3
[76.20]
4-1/2
[114.26]
1-1/4
[31.75]
1-3/8
[34.92]
Connection port
for wired probe
Connection port for
included USB cable
LED indicates
connection to
computer
LED indicates
connection to
wireless probe
LED indicates
connection to
wired probe
DCAL 1000 FEATURE OUTLINE
DWYER INSTRUMENTS, INC.
Phone: 219/879-8000 www.dwyer-inst.com
P.O. BOX 373 • MICHIGAN CITY, INDIANA 46360, U.S.A. Fax: 219/872-9057 e-mail: [email protected]
This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) This device may not cause harmful interference. and (2) this device must accept
any interference received, including interference that may cause undesired
operation.
Cet appareil est conforme à des règlements d'Industrie Canada exempts de licence
standard RSS (s). Son fonctionnement est soumis aux deux conditions suivantes:
(1) Ce dispositif ne doit pas causer d'interférences nuisibles, et (2) cet appareil doit
accepter toute interférence reçue, y compris les interférences pouvant entraîner un
fonctionnement indésirable.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numériqué de la classe B est conformé à la norme NMB-003 du
Canada.
NOTICE