Hoyles Yellow resettable DPCO call point IP67 - Manual (Page 2)

Technical Da ta for W aterpr oof R eSet Cal l Point Series 01 & 11
Wat erproo f Series 01
Denote s a Wat erproo f ReSe t Call P oint that wil l interf ace with
most c onventional fir e alarm sys tems. It is fitt ed with two
internal 1 w att r esist ors 470 and 680 ohm. These are e asily
acce ssed thr ough the installer t erminals as illustr ated.
Wat erproo f Series 11
Denote s a Wat erproo f ReSe t Call P oint that inc orporat es tw o
independent single pole changeover s witches pr oviding double
pole changeover c ontacts. Easily acce ssed thr ough installer
terminals as il lustr ated.
Curr ent Rating (Series 01 & 11)
Curr ent Rating (Series 11 only)
3 Amps 12 - 24V DC
3 Amps 125 - 250V AC
Housing and Mounting Box M aterial Poly carbonate
Electrical Contact M aterial Silver pla ted br ass
Operating T emperatur e -20°C - +65°C
Instal lation T erminal Conduct or Size 0.5mm - 2.5mm
Wat erproo f ReSe t Series 01 & 11
Specifications
Dimensions
NB:S witch arr angements shown with WRP R eSet in stand by.
Mounting Method
1.R emove the W aterpr oof R eSet Cal l Point (WRP) fr om it’s
packaging. Detach the fr ont cov er from the backbo x.
The earthing s trap wil l be attached t o the back box. Y ou
have a choic e to keep or r emove the e arthing strap .
2.Ensur e the conduit or cabling lines up with the
conduit entries loca ted on the t op or bott om of the
back box and r emove the desir ed conduit thr eaded
insert(s). It is rec ommended that entry t o the WRP is
via the one or two 20mm thr eaded entries on the
bott om of the back bo x.
3.T ake the back bo x (ensuring the two entries ar e located
at the bo ttom) and mark the position f or the four fixing
screws.
4.Dril l the holes and instal l the back box using the f our
fixing screws and r awl plugs pr ovided.
5.When the wiring c onnections are c omplete , fix the front
cov er to the back bo x. Ther e are x6 al len screws e venly
distribut ed around the fr ont cov er. Using the al len ke y
provided tight en each al len screw b y one full turn, then
move ont o the next . This will ensur e that e ven pr essur e
is applied all the w ay ar ound. See Dia C for
rec ommendation on the sequenc e to be used. The
rec ommended tor que for the al len screws is 5 N•m.
In order t o achieve IP67 r ating , ensure the fr ont cov er is
securely tight ened to the back bo x.
128mm
62mm 119mm
Front Vie w Side View
680
470
Acce sso rie s
STI F068 Allen K ey
STI M210 WRP Test K ey
STI F069 Earth Str ap
STI C084 ‘O’ Ring
STI M227 20mm Threaded Insert
STI M228 Wat erproo f Washer
Technical Da ta for W aterpr oof R eSet Cal l Point Series 01 & 11
Wat erproo f Series 01
Denote s a Wat erproo f ReSe t Call P oint that wil l interf ace with
most c onventional fir e alarm sys tems. It is fitt ed with two
internal 1 w att r esist ors 470 and 680 ohm. These are e asily
acce ssed thr ough the installer t erminals as illustr ated.
Wat erproo f Series 11
Denote s a Wat erproo f ReSe t Call P oint that inc orporat es tw o
independent single pole changeover s witches pr oviding double
pole changeover c ontacts. Easily acce ssed thr ough installer
terminals as il lustr ated.
Curr ent Rating (Series 01 & 11)
Curr ent Rating (Series 11 only)
3 Amps 12 - 24V DC
3 Amps 125 - 250V AC
Housing and Mounting Box M aterial Poly carbonate
Electrical Contact M aterial Silver pla ted br ass
Operating T emperatur e -20°C - +65°C
Instal lation T erminal Conduct or Size 0.5mm - 2.5mm
Wat erproo f ReSe t Series 01 & 11
Specifications
Dimensions
NB:S witch arr angements shown with WRP R eSet in stand by.
Mounting Method
1.R emove the W aterpr oof R eSet Cal l Point (WRP) fr om it’s
packaging. Detach the fr ont cov er from the backbo x.
The earthing s trap wil l be attached t o the back box. Y ou
have a choic e to keep or r emove the e arthing strap .
2.Ensur e the conduit or cabling lines up with the
conduit entries loca ted on the t op or bott om of the
back box and r emove the desir ed conduit thr eaded
insert(s). It is rec ommended that entry t o the WRP is
via the one or two 20mm thr eaded entries on the
bott om of the back bo x.
3.T ake the back bo x (ensuring the two entries ar e located
at the bo ttom) and mark the position f or the four fixing
screws.
4.Dril l the holes and instal l the back box using the f our
fixing screws and r awl plugs pr ovided.
5.When the wiring c onnections are c omplete , fix the front
cov er to the back bo x. Ther e are x6 al len screws e venly
distribut ed around the fr ont cov er. Using the al len ke y
provided tight en each al len screw b y one full turn, then
move ont o the next . This will ensur e that e ven pr essur e
is applied all the w ay ar ound. See Dia C for
rec ommendation on the sequenc e to be used. The
rec ommended tor que for the al len screws is 5 N•m.
In order t o achieve IP67 r ating , ensure the fr ont cov er is
securely tight ened to the back bo x.
128mm
62mm 119mm
Front Vie w Side View
680
470
Acce sso rie s
STI F068 Allen K ey
STI M210 WRP Test K ey
STI F069 Earth Str ap
STI C084 ‘O’ Ring
STI M227 20mm Threaded Insert
STI M228 Wat erproo f Washer