JLab Audio GO - Manual

JLabAudio.com FOR MORE TIPS VISIT:
Specifications: Precautions:
Troubleshooting:
JLab GO User Tips:
When swimming, please use the included double or triple flange earbud tips. This will insure a comfortable
and water tight seal. The single tips are for dry use.
To adjust the JLab GO for an ideal, snug fit, you can rotate
each earpiece as well as sliding them forwards and
backwards. You can also secure the JLab GO with goggles,
a swim cap, headband, or other similar items. (See Fig. A)
The USB port cover features a right and left locking
mechanism. Turn it right to close the port cover and create
a waterproof seal. Turn it left to open the port cover to
connect the USB cable to the player. (See Fig. B)
Adjusting Fit Securing With Goggles
If the volume lowers while you swim, it may be because the earpiece forms a thin water film on the waterproof
speaker. If this happens, take off the earbud tips，blow off the water film from the waterproof speaker. Gently
squeeze the earbud tips so that any excess water will come out. The volume should return to normal.
Keys are unresponsive Please make sure your JLab GO is fully charged. If not, connect your
JLab GO to your computer until fully charged.
Make sure the volume is properly adjusted.
Make sure your audio file is not damaged.
Make sure the USB cable is connected properly and not damaged.
Make sure your JLab GO has available space.
Make sure the USB cable is connected properly and not damaged.
Restart your computer completely before connecting JLab GO again.
Make sure the MP3 file you are trying to play is not damaged and
is a complete file.
Do not use your JLab GO when temp is below 41°F or above 104°F
Do not subject your JLab GO to impact of any kind that may
result in damage to the internal or external components.
Do not disconnect your JLab GO while it is formatting,
uploading, or downloading. Doing so may cause an error
and possibly corrupt your JLab GO.
Do not attempt to dismantle, repair, or rebuild your JLab GO.
This product is officially rated IPX8, which means a maximum 1.5
meters depth / 60 minutes duration of use.
Warning: Do not over bend headband to avoid breaking.
Manual is subject to change without notice.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
For additional information, product support, and
troubleshooting, as well as the latest promotions,
products and accessories, visit:
Power turns off
No sound from speakers
Not able to add music
Computer does not detect JLab GO
JLab GO will not play MP3
Abruptly stops playing
Solution Problem
IP Rating IPX8
Dimensions 124mm x 33mm x 150mm
Weight 22g
USB Connection High Speed USB 2.0
Battery Rechargable Lithium 190mAh
Memory 4GB
Music Format MP3 8bps~320Kbps, WMA 32kbps~192Kbps
File Format FAT16, FAT32
Audio Output Power 5mW+5mW
Frequency Response 20Hz-20KHz
S/N >70dB
Distortion <0.1%
Operating Environment
Operating Time -5°C~40°C(41 F~104 F)
Approximately 10hrs
JLabAudio.com
To completely dry your JLab GO after use, store in a dry place.
Please make sure the USB port cover is completely
closed before using in water, otherwise it may leak,
causing sever water damage to your JLab GO.
Fig. A
Fig. B
Shuffling music on your JLab Go is easy! Simply turn on your JLab GO player.
Make sure the music is stopped. Press Next once and release it to turn on shuffle function.
The music will start playing automatically and the player will be in shuffle mode. (Note: when the player is
in shuffle mode, the light will flash slowly.) To exit shuffle mode, with the music stopped, press
Previous once and release it.
JLab GO Function Keys:
KEY ACTION
Press and hold for 4 seconds
Press
Press
Play next track
Play previous track
Rewind track
Increase volume once
Rapid volume increase
Increase volume once
Decrease volume once Decrease volume once
Rapid volume increase
Rapid volume decrease
NOTE: The JLab GO MP3 Player’s keys are multi-functional. This means that pressing the same key for rapid or
extended periods will control the different functions as indicated in the table above.
Rapid volume decrease
Select previous track
Select previous track
Fast forward
Select next track
Select next track
Press and hold
Press
Press and hold
Pause
Pause
Play
Next
Previous
Volume + VOL +
VOL - Volume -
Resume playback
Power ON/OFF Power ON/OFF
Pause
Play
Power ON/OFF
Previous
Vol-
Next
PLAYBACK MODE PAUSED MODE
Using Shuffle Function:
Press
Press and hold
Press
Press and hold
Vol+
USB port cover
Connect the small end of the included USB cable to the port on the player.
Connect the other end of the USB cable to your computer’s USB port.
The light on your player will flash indicating that it is charging.
Open the JLab GO drive with your computer’s file explorer.
The player is pre-formatted. Reformatting the drive will destroy functionality
and void your warranty.
Drag and drop your audio files (MP3 or WMA only) directly into the root folder
of the player. (Other unsupported formats may freeze your device.)
The light on the player will stop flashing when the device has fully charged.
When you are finished loading music, close the device folder and
eject the JLab GO drive.
Disconnect the USB cable from the player and your computer.
Replace the USB port cover on your player before using.
Make sure you firmly close the port cover clockwise to engage
the watertight seal.
To charge and add music to your JLab GO,
open the USB port cover located at the
end of your player. (See image at right)
Serial Number:
LIMITED ONE YEAR WARRANTY
Please register your warranty
within 30 days of purchase to
receive optimum coverage.
Warranty Note: Because of the high risk of user error (forgetting to seal the USB port cover before getting the JLab GO wet), as well as the
high cost of testing defective JLab GO units and replacing your JLab GO, there may be a $20 administrative replacement fee on some
warranty replacements. This allows us to offer the widest and best warranty protection for all JLab GO customers. Thanks for your
understanding.
EU Customers: Register At JLabAudio.eu
OWNER’S MANUAL AND WARRANTY
JLab takes great pride in providing you with the highest quality products. If you're not satisfied for
any reason, please contact us and we will resolve the issue to your satisfaction. Please give us the
chance to satisfy you before posting any reviews online.
You can contact us 24 hours a day by e-mail at [email protected] or call us during business
hours toll-free at 1.866.358.6640 and we will be happy to assist you.
The JLab GO Waterproof MP3 player is the first waterproof product from JLab.
We have tested the product thoroughly and are convinced that it conforms to our highest quality
standards. Of course, using a consumer electronics product in or under water does require care and
caution. Please read this manual thoroughly before using your JLab GO. Failure to follow the
directions could result in voiding your warranty.
YOUR SATISFACTION IS GUARANTEED
Congratulations on purchasing this fine JLab Audio product!
What’s Included:
Quick Start Guide:
1. JLab GO MP3 Player 2. USB Cable 3. Spare USB Port Cover 3. Selection of Earbud Tips:
Triple Double Single
TIPS FOR WATER DRY TIPS
L S L L M S S
MOST IMPORTANT PRECAUTION: Make sure the USB port cover is fully sealed
before getting your JLab GO wet! If you don't you will kill your JLab GO.
JLabAudio.com
To register your warranty now,
scan the code at left with your
smart phone, or visit: