Milestone AXIS A1001 Network Door Controller Plug-in - Manual (Page 9)

Milestone XProtect ® Access Control
Module AXIS A1001 Network Door
Controller Plug-in
Getting Started Guide
www.milestonesys.com 9 Configuration and Maintenance
Update configuration
If changes are made to the access control system, such as adding, removing or renaming doors, you
must update the configuration of the integration.
1. Edit the properties of the access control system integration that appears as a node below
Access Control in the Management Application or Management Client.
2. In the General settings tab, click Refresh Configuration. The XProtect Event Server plug-in
retrieves added, changed or removed items from the access control system.
3. Verify that the detected changes are correct and apply them to the running access control
system integration.
Remove AXIS A1001 XProtect Access Control Module
plug-in
To remove the AXIS A1001 XProtect Access Control Module plug-in:
1. Delete all AXIS A1001 plug-in integrations in the Management Application or Management
Client if they are not used anymore.
2. Uninstall the Milestone XProtect Access Control Module – AXIS A1001 Network Door
Controller Plug-in from the XProtect Event Server computer.