Milestone Event Proxy - Manual (Page 11)

Event Proxy User Guide
www.milestonesys.com Page 11 Configuration
States
You are able to add, edit and delete states in the Rules and Events tab’s Rules group box.
Adding a State
To add a state, do the following:
1. Click the Add button in the Sates group box. Alternatively press the Insert key on the
keyboard when the states list view is active.
The Create State window opens:
2. Enter a unique name for the state in the State Name text box.
3. In the Low To High Event combo box select which input event turns the state from Low
(not set) to High (set).
4. In the High To Low Event combo box select which input event turns the state from High
(set) to low (not set).
5. Check the Initially High checkbox if the state should be high (set) initially. Uncheck this box
if the state should be initially Low.
6. Click the OK button or press the Enter key on the keyboard to accept the entered values.
Editing a State
To edit a state, do the following:
1. Select the required state in the States group box, and click the Edit button, or press the F2
key on the keyboard.
The Edit State window opens.
2. Change the required settings.
3. Click the OK button or press the Enter key on the keyboard to accept the changes.