Milestone XProtect Transact - Manual (Page 49)

Milestone XProtect
®
Transact
Administrator's Guide
www.milestonesys.com 49 View transactions
View transactions
With the XProtect Smart Client application, you can view transaction data together with recordings of
the transaction taking place.
In the XProtect Smart Client you simply create a view, select the required transaction data source (for
example a particular cash register), then the required video sources (for example two cameras
covering the area around the cash register from different angles), and you are ready to browse.
The time-linking of the transaction data and video recordings enables you to view and browse the
transaction data and video recordings simultaneously.
Integrate with XProtect Corporate
If your organization has XProtect Corporate surveillance solutions and you want to view transaction
data together with recordings from cameras defined in a XProtect Corporate solution, you must add
the XProtect Transact master server in the XProtect Corporate Manager application, before XProtect
Transact and XProtect Corporate can communicate with each other.
Prerequisite: The XProtect Transact Server and the XProtect Corporate Management Server must be
installed on the same computer.
Tip: If you have several XProtect Transact servers in a master/slave relationship, define the XProtect
Transact Server that shares the computer with the XProtect Corporate Management Server as master.
See Managing Master/Slave Setup on page for more information.
When the communication between the XProtect Transact Server and the Corporate Management
Server is established, you will be able to view transaction data together with recordings from
Corporate cameras in XProtect Smart Clients.
To add a XProtect Transact Server in the XProtect Corporate Manager application, do the following:
1. Open the XProtect Corporate Manager.
2. From the Tools menu, select XProtect Enterprise Servers...
3. In the Add/Remove Protect Enterprise Servers window, click Add....
4. Enter the IP address or the host name of the required XProtect Transact server in the
XProtect Enterprise server IP / Host name field.
5. Enter the port number used by the XProtect Transact server in the Port number field.