NUUO SCB-A08 - Manual (Page 20)

Trusted Video Management
NUUO Surveillance System - Accessory
- 19 -
5.5. Upgrading Firmware
New firmware may be available at times on www.nuuo.com > Download and may downloaded and flashed
to SCB-A08 currently in use. The user can upgrade using a direct connection to SCB-A08 serial port.
Step 1: Download the new upgrade .hex file from www.nuuo.com > Download and place in a folder.
Step 2: Ensure that the DIP switches are all in the OFF position.
Step 3:
Connect a null modem cable between the PC and SCB-A08.
Step 4:
Open the SCB Manager search tool and select the Firmware Upgrade button.
Step 5 :
In the Serial Port selection options select the COM port number used to connect the PC to SCB-A08.
Step 6 : Select Browse, find the location of the firmware, select Open, and then select the upgrade button.
Step 7: Software will change upgrade mode and baud rate setting automatically, then start upgrade
Step 8: A window showing the Upgrade progress will appear followed by a window indicating the Upgrade
was successful.
Step 9: SCB-A08 will reset itself to complete the upgrade process.