PATLITE NHL - Manual (Page 63)

63
4
Table 4.11.1 Application Monitor Setup Parameters
Item Contents
Default
Value
Input
Parameter
Setting
Option
Monitoring Target
Address
Setup the IP address for transmission monitoring. Blank IP Address Format O
Reception Port
Number
Set up the reception port used for the application
monitoring.
0
Half-width numbers 9000-
9999 (When the address
column for the monitor is
blank, it is 0)
―
Equipment
Name
Setup the name for the Ping transmission monitoring. Blank
Full/Half-width Characters
Maximum 31 Characters
O
Monitoring
Duration
Setup the duration for monitoring the application
software.
0
Half-width alphanumeric
1 through 60000(sec)
O
Red
Select from: OFF- ON- Lighting- Flashing1- Flashing2-
No Flashing- No Change
No Change ― ―
Amber
Select from: OFF- ON- Lighting- Flashing1- Flashing2-
No Flashing- No Change
No Change ― ―
Green
Select from: OFF- ON- Lighting- Flashing1- Flashing2-
No Flashing- No Change
No Change ― ―
Blue
Select from: OFF- ON- Lighting- Flashing1- Flashing2-
No Flashing- No Change
No Change ― ―
White
Select from: OFF- ON- Lighting- Flashing1- Flashing2-
No Flashing- No Change
No Change ― ―
Buzzer
Select from:
Pattern1- Pattern2- Pattern3- Pattern4- Stop- No Change No Change
― ―
Email
Transmission Select the Active/Inactive condition for the E-mail Sending.
Inactive ― ―
Subject Select the E-mail subject title 1. Message ― ―
Message Select the E-mail message to text 1: ― ―
TRAP
Transmission
Select the Active/Inactive condition for the trap
transmission.
Inactive ― ―