Raytec RAYLUX 50 HP PoE - Manual (Page 3)

3
Installation
Match illumination to camera field of view
Reduces performance May cause hot spots Best performance
Camera
Light
x
Light
Camera
Light
x
Camera
Mount illuminator
Feed CAT5 cable into waterproof connector
Unscrew waterproof connector. Feed
cable through connector and select the
appropriate rubber bung for the outside
cable diameter. Terminate cable with an
RJ45 connector and fit into the RJ45
socket. Fit the two waterproof connector
ends together and tighten. Finally tighten
the two end gland nuts to ensure that it is
waterproof
Connect to a 802-3AF protocol standard
high power PoE injector switch or hub.
2
3
4
1
InTERnAL AnD EXTERnAL
Use wall bracket if you require horizontal adjustment.
1
2
3
Set Up
1 Optional night set-up
for optimum image
performance
TARGET
Tighten all fixings 3 2 Adjust vertical angle