ROTRONIC CO2 Calibrator - Manual

Setup and adjustment CO
2
transmitter
Required material:
• CO
2
Transmitter (CF5/8-Series)
• CF5/8 Comm Cable
• ROLINE USB to Serial Converter (Article No. 12.02.1089
)
• Software UIP5 from SenseAir, link
• CO2 CALIBRATOR (for CO
2
calibration only)
Installation of USB to Serial Converter Cable:
• Insert installation disk and follow the instructions on the screen.
• IMPORTANT: The cable must be configured from COM-Port 1 to 8 (Device Manager)