Setra System Model 370 User Manual
Page 10
2.2 DISPLAY SYMBOLS
OK
The readings are within the user defined stability requirement.
hPa
The reading shown is given in hectopascals.
PSI
The reading shown is given in pounds per square inch.
inHg
The reading shown is given in inches of mercury.
mbar
The reading shown is given in millibars.
mmHg
The reading shown is given in millimeters of mercury.
inH2O
The reading shown is given in inches of water.
mmH2O
The reading shown is given in millimeters of water.
ft
The reading shown is given in feet of altitude.
m
The reading shown is given in meters of altitude.
SEALEVEL
The reading shown is corrected to sea level.
units
The reading shown is given in user-defined pressure units.
HI ALARM
The reading shown exceeds the HI setpoint.
LO ALARM
The reading shown exceeds the LO setpoint.
HI
The reading shown is the maximum value encountered.
LO
The reading shown is the minimum value encountered.
4