Setra System Model 547 - Manual (Page 7)

FIGURE 1
SUPPLY VOLTAGE
Non I.S: 8.5V to 40V d.c.
I.S: 9.5V to 28V d.c.
MAINTENANCE
Routine Inspection: Not required except for periodic inspection of the cable and molding to ensure
that these are neither damaged nor softened by incompatible liquid.
CAUTION
CARE MUST BE TAKEN NOT TO TOUCH THE PRESSURE SENSITIVE
DIAPHRAGM WHILE CLEANING THE PRESSURE PORT. FAILURE TO
OBSERVE THIS PRECAUTION CAN CAUSE IRREPARABLE DAMAGE.
WARRANTY
The Company warrants its products to be free from defects in material and workmanship in normal use
and service for a period of two years from date of shipment. The Company reserves the right and
option to refund the purchase price in lieu of repair or replacement upon evaluation of the returned
original part. Modification, misuse, attempted repair by others, improper installation or operation shall
render this guarantee null and void. The Company makes no warranty of merchantability or fitness for a
part or purpose.
SERVICING
The transducer cannot be repaired locally and if damaged should be returned to Setra Systems with the
following:
1. Name and phone number of person to contact
2. Shipping and billing information
3. Full description of malfunction
4. Remove any pressure fittings and plumbing that you may have installed and enclose any required
mating electrical connectors and wiring diagrams.