Setra System SRCM - Manual (Page 6)

6
The Condition Banner is the left 1/3rd portion of the screen that can be configured
by the end-user or facility manager to display a message to staff on the floor. The
Condition Banner can be Green, Yellow, or Red or Blue , depending on the type of
message desired outside the pressurized space. The Condition Banner is set up in
the Setup Display-Condition Banner tab of the Administrative menu. The Condi-
tion Banner also has an option to display in full screen mode.
The Condition Banner will change to red in alarm state regardless of the current
configuration. The banner may be changed manually, as required, by pressing the
touch-screen anywhere within the banner color region.
Green Condition Banner—shows En-
try Permitted graphic, and user defined
text above and below graphic image.
Use the GREEN banner to indicate
room is safe to enter.
Red Condition Banner—shows
Stop graphic, and user defined text
above and below graphic image.
Use the RED banner to indicate
room is under critical use and entry
Yellow Condition Banner—shows
Warning graphic, and user defined text
above and below graphic image. Use
the YELLOW banner to indicate room
is under transient use and entry is re-
stricted.
User defined text
ENTRY PERMITTED
graphic (arrow is not intended
to indicate direction of airflow)
User defined text
User defined text
STOP graphic
User defined text
User defined text
Warning graphic
User defined text
Condition Banner
User defined text
ENTRY PERMITTED
graphic (arrow is not intended
to indicate direction of airflow)
User defined text
BLUE Condition Banner—shows
Entry Permitted graphic, and user
defined text above and below graph-
ic image. Use the GREEN banner to
indicate room is safe to enter.