Sterlco HDG Series Heavy Duty Granulators - Manual (Page 32)

Bulletin Number Chapter 7: Appendix 32 of 36
Specifications
Standard Standard Options
Infeed Conveyor Feed
Tray and sheet feed; Tray and feed
rolls; Pipe Feed
Cutting Chamber Rotor
2-Bed Knife
Hard facing, water cooling, air purge
bearings
Open 3-Knife high shear
5-Knife high shear; 3-Knife steep
angle; 5-Knife S/A
Rotor Knives HCHC Steep angle, 55 degree (B Series only)
Bed Knives (2) HCHC Raised D/S (B Series only)
Screen 3/8" N.H.T. 1/4" and larger, H.T.
Drive Parts V-Belt
Electrical Components NEMA12 with safety locks
Controls Customer Supplied 230, 460, or 575 volt, NEMA 12
Labels Safety/caution/operation labels
Accessories
Blower, Cyclone, Separator,
Conveyor