Teco US TECO RA - Manual (Page 2)

8) Check all joint welds with gas leak detector.
9) Replace the cover on the chiller and restart it.
Pict.1: This picture shows the pin inside
the valve hole.
Schrader valve
Pict.4: This picture shows the
Schrader valve.
max 5mm
inside filter
Weld new
Copper
pipe to
condenser
New
filter
Cut the capillary
pipe near the
filter end
Heat and
remove the
copper pipe
from condenser
Pict.2: This picture shows which parts you must cut or
heated and removed in order to substitute the filter.
Pict.3: This picture shows the fittings to the new filter.