Timeguard TG24B - Manual (Page 3)

2
Programming
1 Decide what times you would like the TG24/TG44 to switch
ON and OFF.
2 Push all the segments downwards for the complete duration
of an ON period and leave them all in the upper position for
an OFF period (see diagram above left).
The minimum switching interval is 15 minutes and this can
be increased in 15 minute steps.
3 Ensure that the override switch is in the timed ( ) position
as shown in the diagram above right.
Segment shown in ON
(lower) position
Override
switch
Permanently
ON
Timed
Segment shown in OFF
(upper) position