Timeguard ETU17 - Manual (Page 8)

7 8
Zer
ofour – November 2013
IMPORTANT After setting a clock time which falls within a
programmed ON period, the unit will not switch ON. Press the
<Change> button to switch the ETU17 ON (the ON will flash
to indicate an override situation). After this the unit will operate
normally to the programmes set.
4. Programme Review:
To fast review the set programmes or for quick exit to normal
operating mode – press and hold down the <Program> button.
Normal review can be carried out by pressing the <Program> button
briefly which reviews the clock time and day with the whole display
flashing. Further brief pressing of this button reviews the programme
ON and OFF times and day(s) in sequence again with the whole
display flashing.
5. Making Changes to
Clock Time and Programmes
(Initiating Programme Mode):
This is required when making changes to the clock time/day or
programme times/days and can be initiated any time during the
normal operating mode. Press the <Program> button briefly and
the clock symbol, day flag, hrs and minutes symbols on the display
will flash – this is programme review mode. Further brief pressing
of the <Program> button will display the ON and OFF programmes
in sequence.