Timeguard NTT04 - Manual (Page 3)

2
2. Features:
4 on/off switching programmes,
which can be made to operate over all 7 days
(24 hour operation), 5 weekdays 2 weekend days,
or any individual day (7 day operation).
Advance feature advances to next
programmed operation.
Boost feature provides 1 or 2 hour boost.
Battery back up retains programmes and clock
times during loss of mains.
option of automatic summer time update (ASCo).
Shortest switching time of 1 minute.
Programme review.
3. Installation:
We recommend that this unit be fitted by a
qualified electrician. Install in accordance
to wiring and current building regulations.
Please read the instructions carefully. If in
any doubt contact the Timeguard Helpline.
Important: Switch off mains electricity
before commencing work.
Remove the two bezel fixing screws, and remove
bezel from timer module and back plate. Separate
the timer module from the back plate, and remove
the wall fixing screws.
Ensuring that the free terminals on the back plate
are at the top, connect the installation wiring to
the terminal block, according to the legend on the
wiring label.
The earth wires should be connected to the wall
box earthing terminal, or should be connected
together using a single way connector block if
there is no suitable earth terminal in the back box.