Timeguard DS3HD - Manual (Page 8)

8
3. Mounting and Installation
Warning: Switch off mains electricity
before proceeding with installation.
IMPORTANT NOTICE:
• This product should be installed in accordance
with the current IEE and Wiring Regulations.
• If in doubt consult a qualified electrician.
• Do not use the mains supply connector for wiring
continuity. Mains input must be supplied from its
own 16 Amp MCB.
Figure 2 - Internal of DS3HD
Four PCB mounting screws
Knock outs for cable glands
Four fixing
holes
Push
button
switch
connector
Time
delay
selector
Four fixing
holes
Mains
supply
input and
output
connector