Timeguard ECO36PIR - Manual (Page 5)

SIDE VIEW
TOP VIEW
GOOD
SENSITIVITY
lESS
SENSITIVITY
APPROACH
PATH
Fig. 1 Fig. 2
AIMING DIRECTIONS
INFRA-RED COvERAGE AREA
2m
3m
10m
12m
160º 110º
90º
12m
10m
3m
SETTING UP FOR AUTOMATIC OPERATION
The time Control determines how long the light stays on following activation and after all
movement ceases. It is approximately linear so the mid point gives around 31/2 minutes delay
from last detection.
The required time can now be set.
An approximate setting for the lux (light) control to give operation after dusk only is between
2/3 and 3/4 of the way round from the Sun position toward the Moon position.
This setting can be fine tuned after observing the units performance at dusk.