UEi Test Instruments INF215 - Manual (Page 2)

Introduction
The INF 215 is perfect for frequent use in advanced or specialty applica t i o n
environments, where wide temperature ranges and superior optics are
essential for use on targets at greater distances. A UV Worklight has been
added to diversify the INF 215’s use. This full-featured IR Thermometer
is the most comprehensive and best-valued Infrared Thermometer on
the market.
The INF 185’s increased features offer advanced trend analysis for
professionals that require a greater quality of infrared optics, extended
measurement and the versatility of a K-Type surface or contact probe. A
worklight has been added to allow visibility in low-lit workspaces.
Features include (INF215)
• -76˚ to 1400˚F
• 30:1 Distance to Spot Ratio
• UV Worklight
Features include (INF185)
• -76˚ to 932˚F
• 12:1 Distance to Spot Ratio
• Worklight - Bright white
Shared. . .
• MIN/MAX/Differential, Average
• Adjustable emissivity levels
• Hi/Lo Alarm (User adjustable)
• Contact probe input
• Over-molded handle with comfort grip
• Carry Case
Safety Notes
Before using this infrared thermometer, read all safety information
carefully. In this manual the word "WARNING" is used to indicate
conditions or actions that may pose physical hazards to the user. The
word "CAUTION" is used to indicate conditions or actions that may
damage this instrument.
NOTE: The INF185/INF215 is not recommended for use on shiny
surfaces such as chrome, mirrors or polished metals.
WARNING!
To avoid thermal shock, the instrument should be stored at room
temperature between 32˚ to 122˚F (0˚ to +50˚C).
WARNING!
DO NOT look directly into the laser beam. Permanent eye damage
may result.
C o n t rols and Indicators
1. Trigger: Initiates measurements.
2. IR Sensor
3. Laser Pointer Beam
4. Worklight: INF185 = white
INF215 = UV
5. Battery Compartment
6. Thermocouple Socket
Displays and Indicators
INF185/215-MAN P. 1
4
3
1
7
6
2
5
2
3
5
1
6
Front view
4
1. Mode Push-button
2. Lock and Backlight
( ) Push-button
3. ˚F/˚C and Laser
( ) Push-button
4. Value labeled
parameters
5. Scale
6. Battery level
7. Hi/Lo Alarm
8. Scan indicator
9. Backlight
10. Laser splash
11. HOLD
12. LOCK
13. Polarity
14. MIN, MAX, DIF,
AVG, E, E , PRB