Brother PJ-623 - Manual (Page 21)

ESC SP n
[ N a m e ] Specify character spacing
[ C o d e ] 1Bh 20h nnh
[Function] Specifies the amount of character spacing for alphanumeric characters.
[Details] Since the spacing is the remainder from dividing n by 128, 0 to 127 is the normal
range of parameters that are used.
The default is 0.
The units for the spacing are 1/180 inch.
ESC q n
[ N a m e ] Select character style
[ C o d e ] 1Bh
71h nnh
[Function] Selects the character style for alphanumeric characters.
[Details] n = 00h: Normal characters (default)
n = 01h: Outline
n = 02h: Shadow
n = 03h: Shadow and outline
No character limitations
ESC 4
[ N a m e ] Apply italics
[ C o d e ] 1Bh 34h
[Function] Applies italics to alphanumeric characters.
[Details] B0h through DFh as well as F4h and F5h of the advanced graphics code table
are printed as normal characters.
ESC 5
[ N a m e ] Cancel italics
[ C o d e ] 1Bh 35h
[Function] Cancels italics for alphanumeric characters.
©Copyright 2011 BROTHER INDUSTRIES, LTD.
21