Brother PJ-523 User Manual
Page 9
8
y
Do not try to disassemble, alter or repair the AC adapter, otherwise fire, an electric shock or
injuries may result.
For servicing, adjustments or repairs, contact the sales representative where the printer was
purchased.
y
Do not spill water or drinks on the AC adapter. In addition, do not use the adapter in a location
where it may get wet, otherwise combustion or an electric shock may result.
y
If the power supply plug becomes dirty, for example, with dust, unplug it from the electrical out-
let, and then wipe it with a dry cloth. If you continue to use a dirty power supply plug, a fire may
result.
Caution
y
When unplugging the power supply cord, do not pull on the cord, otherwise fire or an electric
shock may result.
y
Do not insert foreign objects into the terminals of the AC adapter, otherwise burns or an electric
shock may result.
y
Incorrectly using the AC adapter may result in fire or an electric shock. Therefore, observe
the following precautions.
{
Do not damage it.
{
Do not place objects on it.
{
Do not modify it.
{
Do not subject it to heat.
{
Do not twist it.
{
Do not bind it.
{
Do not severely bend it. { Do not allow it to be pinched.
{
Do not pull on it.
y
If the AC adapter is damaged, request a new one from the sales representative where the
printer was purchased.
y
Keep the AC adapter out of the reach of children, particularly infants, otherwise injuries may
result.
y
Do not use the AC adapter near microwave ovens, otherwise damage to adapter or printer may
result.
y
Do not use the AC adapter near flames or heaters. If the covering of the AC adapter cord melts,
fire or an electric shock may result.
y
Before maintaining the printer, for example, when cleaning it, unplug the AC adapter from the
electrical outlet, otherwise an electric shock may result.
y
If the printer is not to be used for a long period of time, be sure to unplug the AC adapter from
the unit and the electrical outlet for safety reasons.
y
Do not wind the AC adapter cable around the adapter or bend the cable, otherwise the cable
may be damaged.
Warning
PoketJet_QG_UK.book Page 8 Friday, August 21, 2009 3:10 PM