Esc ixp2 specify print start command text string, Esc ixp2, Specify print start command text string – Brother TD-4100N User Manual
Page 52
ESC iXP2
Specify print start command text string
[ASCII]
ESC i X P 2 n1 n2 data
[Decimal]
27 105 88 80 50 nd1 nd2 datad
[Hexadecimal]
1B 69 58 50 32 nh1 nh2 datah
[Parameters]
01h≤nh1≤14h
nh2:00h (Fixed)
00h≤datah≤FFh
[Description]
・
Specifies the text string for the print start command.
nh1+(nh2*256):
Length of the text string (can be set between 1 and 20)
data:
Text string (The maximum number of characters that can be set is 20
characters (bytes).)
・
The default text string for the print start command is “^FF”.
・
This command is a static command.
[Remarks]
・
Invalid when an attempt is made to specify more than 20 characters
[Example]
・
To change the text string for the print start command to “START”:
Since the text string to be specified (data), “START”, contains 5 characters, nh1=05h and
nh2=00h. Therefore, the command will be as follows.
ESC i X P 2 05h 00h S T A R T
(1Bh 69h 58h 50h 32h 05h 00h 53h 54h 41h 52h 54h)
32