Brother TD-4100N - Manual (Page 60)

ESC iXy2 Specify machine settings (cut options–specify cutting after a number of
labels)
[ASCII] ESC i X y 2 n1 n2 n3
[Decimal] 27 105 88 121 50 nd1 nd2 nd3
[Hexadecimal] 1B 69 58 79 32 nh1 nh2 nh3
[Parameters] nh1:01h (Fixed)
nh2:00h (Fixed)
01h≤nh3≤63h
[Description]
・ Specifies that the tape will be cut after the fixed number of labels. (If the auto cut setting
is set to ON, the tape will be cut after the number of labels specified with this setting.)
nh3: Cuts after a fixed number of labels (01h to 63h)
・ This command is a static command.
[Example]
・ To cut after every five labels (However, the auto cut setting must be set to ON.)
ESC i X y 2 01h 00 05h
(1Bh 69h 58h 79h 32h 01h 00h 05h)
40