Brother PT-2420PC - Manual (Page 28)

24
Troubleshooting
Monitoring the P-touch Status
You can determine the status of the PT-2420PC from the status indicator.
Status Indicator
Lights up
Flashes a few times
Flashes quickly
Flashes, staying off
longer that it is on
Flashes slowly
Cause
→ → → → → Remedy
• The P-touch is operating normally and is in stand-by.
• The P-touch is receiving data from the computer correctly.
• The cassette is not installed.
→ Install a cassette.
• A transmission error occurred.
→ Press the power/feed key to turn
the PT-2420PC off, then on again.
• The tape cutter button was pressed while printing
→ Try printing again.
• An EEPROM error occurred.
→ Contact your service representative.
• The print head is cooling down.
→ Wait until printing continues.