Acer Altos G330 Series - Manual (Page 125)

107
Onboard LSI SATA RAID configuration
This section briefly shows how to create a RAID 1 volume using the
onboard LSI SATA RAID function.
Enabling the onboard LSI SATA RAID function
1 Turn on the server and the monitor.
2 During POST, press F2 to access the BIOS Setup Utility.
3 Select the Advanced | IDE Controller submenu.
4 Change the setting of the Configure SATA as RAID field to
Enabled.
The SATA RAID OPROM field will appear.
5 Change the setting of the SATA RAID OPROM field to LSI.
6 Press F10, and select Yes to save the new SATA RAID settings and
close the Setup Utility.
Entering the onboard LSI RAID Configuration Utility
During POST, press Ctrl-E in the Intel Embedded Server RAID
Technology information screen.
Loading the onboard LSI SATA RAID default setting
1 In the onboard LSI RAID Configuration Utility, select Objects from
the Management menu.
2 Select Adapter from the Objects list.
The available adapter options will be displayed.
3 Press Enter in the adapter list.
The adapter settings will be displayed.
4 Select Factory Default, then YES to load the default settings.
5 Close the configuration utility.
6 Press Ctrl+Alt+Del to reboot the system.