Acer Altos G330 Series - Manual (Page 53)

35
Upgrading the processor
Altos G330 has one LGA775 processor socket that supports a variety of
Intel processor models. Refer to page 3 to for a list of these supported
processor options.
This section explains the procedures for removing and installing the
processor and heat sink-fan.
Processor configuration precautions
• Handle the processor and the HSF assembly carefully. Damage to
either may prevent the system from functioning properly.
• Do not touch the pins on either the processor or the processor
socket; they are very sensitive and are easily damaged.
• Do not force the processor into the socket. When properly
aligned, the processor will easily fit into place.
• Be sure that the server has the most recent ROM version. Failure
to flash the ROM before installing a new processor can cause
system failure.
To upgrade the processor:
1 Perform the pre-installation instructions described on page 26.
2 Lay the server on its side (components showing).
3 If necessary, remove any accessory boards or cables that prevent
access to the HSF.