Brother PED-Basic - Manual (Page 16)

ENGLISH
ENGLISH
ENGLISH
ENGLISH
ENGLISH
ENGLISH
12
● ●
Exit
Quits the application.
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Option
● ●
Select System Unit
Allows you to select the unit of measurement (millimeters or inches).
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Help
● ●
Contents
Displays the help for this application.
2 Click [File], then [Print Preview] from the
menu bar.
An image of the pattern selected for printing is displayed.
3 Click [Close] to close the dialog box.
1 Click [File], then [Exit] from the menu bar.
The application quits immediately.
1 Click [Option], then [Select System Unit] from
the menu bar.
The Select System Units dialog box appears.
2 Select the appropriate units (mm or inch).
3 Click [OK] to confirm the setting.
◆ Click [Cancel] to stop the operation.
The information that will be printed differs
depending on the specified Print Setup set-
tings. (See page 10, “Print Setup”).
Function
Operation
Function
Operation
Function
PE-DESIGN.book Page 12 Monday, October 25, 2004 10:56 AM