Verifying connection to the router – Airlink101 AR420W User Manual
Page 5
Advertising
5
3. Verifying Connection to the Router
Step 1
Go to Start, Run, type command (for Windows 95/98/ME) or cmd (for Windows
2000/XP) and click OK. You will see the command prompt as below.
Step 2
Type ping 192.168.1.1 and press Enter. You should get four reply responses
back.
Step 3
If you get Request timed out, or Destination host unreachable, double-check
the network cable connection between the computer and the router and try
Step 2
again.
If you still encounter problem, go to the next step; otherwise proceed to Section 3,
Configure the Router.
Step 4
For Windows 2000/XP, type ipconfig/release and press Enter.
Advertising